Thermal Camera Core
Thermal Security Camera
Drone Thermal Camera
EO IR Systems
Thermal Imaging Binoculars
Infrared Thermal Camera Module
High Resolution Thermal Camera Module
Cooled Infrared Detectors
Optical Gas Imaging
Thermal Camera For Fever Detection
Cooled Camera Modules
Vehicle Mounted Thermal Camera
Integrated Dewar Cooler Assembly
Uncooled Infrared Detectors
RS046 MCT MWIR Camera Module 640x512 15μm Integrated Structure
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Resolution||640x512 / 15μm||NETD||≤18mK|
RS046 MWIR Camera Module,
MWIR Camera Module 640x512,
MWIR Camera Module Integrated Structure
The Accelerator for 640x512 / 15μm RS046 MCT MWIR Cooled Infrared Detector Integration
EYAS series cooled AD modules have the pre-amplifier function to convert the analog signal from cooled IR detectors into a digital video stream output. It is available with different resolution formats and different wave bands. EYAS615B is a member of EYAS family with 640x512@15μm MWIR infrared detector and RS046 cryocooler integrated.
EYAS615B AD module features in frame rate up to 120Hz, snapshot, ITR/IWR, windows, anti-blooming working modes. The proximity board comes with EYAS615B makes it an accelerator for OEM customers to carry out fast acceptance test on GST detectors, start rapid secondary development and shorten their development period of modules and complete products based on cooled infrared detectors.
- Easy to Develop & Integrate
- Cameralink Interface Output 16bit Raw Data, Serial Port Control
- Integrated Structure, Dimensions are Consistent with Detector
- 5V Single-supply
- Capable of Capturing High Speed Moving Target
|IR Detector Performance|
|Spectral Range||3.7μm～4.8μm MW|
|Cooling Time (25°C)||≤5.5min|
|Optimal NETD (20°C)||≤18mK|
|Frame Rate||1~50Hz Adjustable|
|Working Mode||Snapshot; ITR/IWR Integration Mode; Windows Mode; Anti-blooming|
|Standard External Interface||QSH 60pin|
|Digital Video||Cameralink: Output 16bit Raw Data|
|External Sync||CC1: INT/Frame External Sync; CC2: MC External Sync|
|Communication||Cameralink Serial Port: TFG+/-, TC+/-; 9600bps|
|Power Supply||1 Channel Imaging Panel: 5V
1 Channel Cryocooler: 12V
|Stable Power Consumption||8W|
|Working Temperature||-40°C ~ +60°C|
|Vibration Magnitude||Vibration: GJB Vehicle-mounted High Speed Transport
Shock: Half-sine Wave, 40g 11 ms, 3 Axis 6 Direction 3 Times Each
The EYAS615B thermal imaging module is widely used many areas such as Remote Monitoring System, Flight Vision Enhancement System, Multi-sensor Payload etc.
1. What is NETD?
NETD refers to "Noise Equivalent Temperature Difference". It is a measure for how well a thermal imaging detector is able to distinguish between very small differences in thermal radiation in the image. NETD is typically being expressed in milli-Kelvin (mK). Usually the lower the NETD figure is, the higher the thermal sensitivity indicates.
2. What are the key considerations on an infrared detector / thermal module for your application?
---The detector resolution
---The pixel size
---The image quality
---The lens options
---The power consumption
---The size and weight
---The mechanical & electrical interface
3. What are the characteristics of cooled & uncooled infrared focal plane detector?
Infrared focal plane detectors can be divided into cooled infrared focal plane detector and uncooled infrared focal plane detector. Cooled infrared detector works at a low temperature vacuum environment with high sensitivity and can distinguish more subtle temperature differences, while uncooled infrared focal plane detector does not need a cryogenic environment and can work at room temperature.