-
Thermal Camera Core
-
Thermal Security Camera
-
Plug-in Thermal Camera
-
Cooled Infrared Detectors
-
Cooled Camera Modules
-
Optical Gas Imaging
-
Radiometric Thermal Module
-
High Resolution Thermal Camera Module
-
Thermal Camera For Fever Detection
-
Vehicle Mounted Thermal Camera
-
Integrated Dewar Cooler Assembly
-
Uncooled Infrared Detectors
120x90 Resolution 12μm Pixel Pitch 25Hz Frame Rate Radiometric Thermal Module for Mobile Devices
| Spectral Range | 8~14μm | Frame Rate | 25Hz |
|---|---|---|---|
| Resolution | 120x90 | Pixel Pitch | 12μm |
| Temperature Range | -20℃~+550℃ | Output Data | 14bit Raw |
| Highlight | DVP Interface Thermal Camera Module,Thermal Camera Module 120x90,14um Thermal Camera Core |
||
The TIMO120 miniature infrared module integrates wafer-level optics, a 120×90 / 12μm wafer-level package (WLP) detector, and a basic image processing circuit to rapidly capture thermal images and heat distribution of the target area.
The TIMO120 thermal imaging module is engineered for optimized size, weight, power, and cost (SWaP-C) infrared imaging applications. Its ultra-miniature structure and ultra-low power consumption make it ideal for integration into a wide range of smart devices, thermal imagers, and mobile terminals with strict requirements on cost, size, and weight.
- Entry-level infrared thermal imaging unit, enabling basic thermal imaging functionality with maximum cost efficiency
- Compact size, lightweight, and low power consumption — ideal for integration into miniature devices
- Ultra-low power design, consuming as little as 9mW
- Smooth imaging with a frame rate of 25Hz
- Supports SPI image interface, compatible with various embedded platforms
- Compliant with RoHS 2.0 environmental standards
| Model | TIMO112 |
|---|---|
| Resolution | 120×90 |
| Pixel Size | 12μm |
| Spectral Response | 8~14μm |
| Focus Mode | Focus Free |
| Lens (HFOV/FL) | 50° / 1.6mm | 90° / 0.9mm |
| Weight (g) | 1.8 |
| Size (mm, without FPC) | 12.6mm × 12.6mm × 8.8mm | 12.6mm × 12.6mm × 6.6mm |
| Number of PINs | 40PIN |
| Output Data | 14bit Raw |
| Frame Rate | 25Hz |
| Temperature Measurement Range | -20℃~+550℃ (-20℃~+150℃ | +100℃~550℃) |
| Temperature Measurement Accuracy | Greater of ±2℃ / ±2% |
| Operating Temperature | -20℃~+60℃ |
| Humidity | 5%~85% |
| Storage Temperature | -45℃~+85℃ |
| Certification | RoHS 2.0 / REACH |
The TIMO112 infrared thermal camera module is widely used across many areas, including thermography, intelligent hardware, smart buildings, smart homes, AIoT, and more.
A wide range of product formats — including infrared detectors, camera cores, and modules — to meet various integration requirements.
Multiple array resolutions, pixel sizes, wavebands, and lens option combinations provide greater flexibility for diverse applications.
Clear imaging, compact size, low power consumption, high sensitivity, and strong reliability — designed to perform under a wide range of environmental challenges.
Multiple interface options make integration straightforward and enable rapid development across multiple application fields.
The main difference lies in the lens material. Thermal imaging lenses must be made of special materials because infrared heat radiation cannot pass through glass (silicon). Instead, special lenses made from germanium, chromium, and other metal materials are used. This also makes thermal imaging lenses more expensive than optical lenses, which contributes to the higher overall cost of the device.
Their imaging principles are fundamentally the same. Imaging devices capture light waves within a certain wavelength range. In nature, the wavelength range of visible light is from 0.39μm to 0.78μm, while the wavelength range of infrared thermal radiation is from 0.75μm to 1000μm. As long as a target's temperature is above absolute zero (-273℃), it will emit infrared radiation.

